Xerox PRO 35 sotware problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tinochka
    Trusted Tech
    • Jul 2012
    • 127
    #1

    Xerox PRO 35 sotware problem

    I instaled the software 3.97.20.00. All procedure finished OK, but after reboot I saw on display "system bootup procesing" and machine is not working.
    In service manual I found: SERVICE BULLETIN - pws://busrec/Bulletin-DC535f/lynn69903245514696001629515175.dat?hits='system|bo otup'


    Could anybody upload these files DUUV2P101C.bin and SBCV2P10.bin. These files are available from GSN library 1229.
    Tags: None
    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2383
      #2
      Re: Xerox PRO 35 sotware problem

      Originally posted by Tinochka
      I instaled the software 3.97.20.00. All procedure finished OK, but after reboot I saw on display "system bootup procesing" and machine is not working.
      In service manual I found: SERVICE BULLETIN - pws://busrec/Bulletin-DC535f/lynn69903245514696001629515175.dat?hits='system|bo otup'


      Could anybody upload these files DUUV2P101C.bin and SBCV2P10.bin. These files are available from GSN library 1229.
      You are not in the situation to use these files.
      Check the controller memories and voltages.

        Comment

        Previous template Next
        Working...