I just installed a Riso ComColor 9050 with a IS900C RIP. The install didn't have any errors.
When I send a job, the RIP reports getting the job, but there are no pages to the job. I have tried three different print drivers (Windows XP system).
The 9050 will print reports that are stored on the machine, and when "Test" (back of RIP) is pressed the RIP sends and prints a test print, so the RIP is talking to the 9050.
Any help is appreciated.
Manassasralph
When I send a job, the RIP reports getting the job, but there are no pages to the job. I have tried three different print drivers (Windows XP system).
The 9050 will print reports that are stored on the machine, and when "Test" (back of RIP) is pressed the RIP sends and prints a test print, so the RIP is talking to the 9050.
Any help is appreciated.
Manassasralph
Comment