Riso RZ 200EP Paper feed issues.

[adam87]

Hi there, I'm Adam. Ive got a few years Riso experience but have come into a bit of a problem with a Riso RZ 200EP I've just got.

It has low usage but has feed issues. I've adjusted the stripper unit but after about 3 sheets, paper gets stuck in the middle of the machine (see pics). I was hoping someone might have some suggestions as to what the problem might be or anything I could try to fix it?


Many Thanks, Adam.


1.jpg2.jpg3.jpg

[20gaugeO/U]

Re: Riso RZ 200EP Paper feed issues.

If it's a J08 it could be nothing but a dirty paper IN sensor. If the copy count is low it may have the original FT and sep pad in it and maybe they just need replacing. Then feed clutch may be dirty or 1 way sector gear... all kinds of info on this site

[misterno]

Re: Riso RZ 200EP Paper feed issues.

I agree. try cleaning the IN sensor. What is the status of the print counter?