Ricoh DX3243

[Staggan]

Hello

I posted the below... and I wondered if someone in this forum could help..

I am looking for some advice on a Ricoh PriPort machine...

The image is randomly moving up and down the page....

I have replaced both the pickup and feed roller, as well as the feed clutch but it has not helped at all... (it was also jamming)

I can't find anything in the service manual that seems to offer any direction and I am unable to find anyone who has any real experience of these machines..

I did wonder if perhaps the drum itself was causing problems and could perhaps be moving / worn in some way..

Any suggestions would be greatly appreciated.

Thanks

[stat]

Re: Ricoh DX3243

Been a long time since I've worked on a priport however I remember there is a set screw on the drum drive gear
that loosens up over time and cause print to wander slightly. Hope this helps

[usta]