RISO Comcolor 9050 firmware

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ermin
    replied
    I have the same issue, any help appreciated. PM available.

    Leave a comment:


  • ahadtamale
    replied
    Re: RISO Comcolor 9050 firmware

    Originally posted by hory_143
    The thread can be closed,The problem is solved,


    Description:
    The Riso 9050 had a miscellaneous with the HDD was crashed,
    I replace the HDD to a new one,
    And install the latest firmware.
    Now the Riso works fine.
    Pls am also facing same issue pls can u help me the the firmware. Riso Comcolor 9050

    Leave a comment:


  • hory_143
    replied
    Re: RISO Comcolor 9050 firmware

    Originally posted by hory_143
    Hello,

    My Riso gives me only a Japanese language without an admin and i can't do anything with it, can anyone send me a new firmware for it.
    I think that will be the only solution for my machine..
    The thread can be closed,The problem is solved,


    Description:
    The Riso 9050 had a miscellaneous with the HDD was crashed,
    I replace the HDD to a new one,
    And install the latest firmware.
    Now the Riso works fine.

    Leave a comment:


  • Phil B.
    replied
    Re: RISO Comcolor 9050 firmware

    Originally posted by hory_143
    Hello,

    My Riso gives me only a Japanese language without an admin and i can't do anything with it, can anyone send me a new firmware for it.
    I think that will be the only solution for my machine..
    1) Discussion of this subjecct is in violation of forum rule #5.

    2) Email or PM should be included in the post

    3) Post isn't in DUPLICATOR forum

    Please review ALL forum rules, due to the fact you have a nice collection of RED CARDS.

    Leave a comment:


  • hory_143
    started a topic [Misc] RISO Comcolor 9050 firmware

    RISO Comcolor 9050 firmware

    Hello,

    My Riso gives me only a Japanese language without an admin and i can't do anything with it, can anyone send me a new firmware for it.
    I think that will be the only solution for my machine..
Working...