Hi guys,
first post here and a total noob with duplicators so please go easy on me. Basically I have bought a second hand Duplo 460H with 2.5m number count, it arrived today.
The seller did inform me that the machine is in need of a service and I will be looking into this next week but in the meantime I would appreciate any ideas or advice.
I have a problem and was hoping someone here could point me in the right direction or give me some advice. I cannot print more than one page without getting a paper jam on the feed side. I have been trying this all day, changing the air rate, paper thickness etc, all to no avail. (Very Very frustrating!!!)
Has anyone come across this problem before on this machine and if so have you come up with a cure.
Thanks guys
first post here and a total noob with duplicators so please go easy on me. Basically I have bought a second hand Duplo 460H with 2.5m number count, it arrived today.
The seller did inform me that the machine is in need of a service and I will be looking into this next week but in the meantime I would appreciate any ideas or advice.
I have a problem and was hoping someone here could point me in the right direction or give me some advice. I cannot print more than one page without getting a paper jam on the feed side. I have been trying this all day, changing the air rate, paper thickness etc, all to no avail. (Very Very frustrating!!!)
Has anyone come across this problem before on this machine and if so have you come up with a cure.
Thanks guys