Machine goes to add master to drum and then throws A02-509. Rewind master and then it kicks A02-555. The issue is restricted to the black drum, all 3 other drums work properly. Tried manually placing master on drum and then re running with the same result. I'm assuming it's an issue with the machine locating the a sensor. Just wondering if anyone else has seen this. Machine has almost 6mil on the print counter.
-
the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed. -
Figured it out after a lot longer than it should have taken. Previous tech put the incorrect collar on the projection plate, so when the master was loaded onto the drum, the projection plate was actually moving up and hitting the master entrance guide in the machine, catching the master on the edge of the entrance mylar. He owes me a beer.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.
Comment