I'm actually leaving the office now. I've got a splitting headache and am about to pass out. I'll come back to this problem tomorrow. Joelsa12, it says you're in Indianapolis. Are you, indeed, in Indy? If so, would you be willing to stop by sometime and look at the machine? I'll pay ya.
-
-
you will see that the nub(main shaft) fits into the drum. it will only go in one way. the small part should be at 12 oclock and the bigger fatter part should be down just like it is on the drum. this will allow the main shaft to slide inro the opening on the drum. I would bet it is a little off due to all of this messing with it. you can reach in the to the back of the machine with the drum out and turn this. it will be hard, but it will turn.Comment
-
i just noticed that you are in indianapolis. so am I. i hope that you are not working on one of my machines
Comment
Comment