DUPLO DP-430

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • JustManuals
    replied
    Duplo Manuals:

    Duplo - The Internet's largest collection of manuals

    Leave a comment:


  • Rudi
    replied
    (6) "E006" is displayed
    Cause/Detective section Procedures Items to be checked Result Countermeasure
    1
    Does contact pressure motor turn when
    it is checked using HELP02*?
    YES Follow the procedure
    5.
    Press motor
    2

    Using a tester, measure the voltage
    between CN12-8 (+) and CN12-9 (GND)
    when the press motor is activated using
    HELP02*. Is it +24V?
    YES
    Check the bundled wire. If OK, replace
    the press motor.
    Regulated power supply
    3

    Drive PCB unit
    4
    Does replacing the drive PCB unit solve
    the problem?
    YES Finish.
    Main PCB NO
    Check the connector and bundled wire
    between the drive PCB unit CN1 and
    the main PCB CN3. If OK, replace the
    main PCB unit.
    Pressure encoder sensor
    5

    Turn the pressure encoder sensor on
    and off, and use a tester to measure
    voltage. Is voltage normal?
    NO Replace t pressure encoder sensor.
    Measure the voltage between the regulated
    power supply, +S (+24) and -S(GND)
    with the tester. Is it +24V?
    NO
    Measure the voltage between L and N of
    the regulated power supply with the tester.
    If it is 100V, replace the regulated power
    supply.
    YES Follow the procedure
    4.

    Leave a comment:


  • pinheiro
    started a topic DUPLO DP-430

    DUPLO DP-430

    Hi,

    I looking for Duplo service manuals, please someone can help with ERROR CODE E006 on this models, ???
    Thanks
Working...