inquiry about riso rn 2030 ui

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • downhiller67
    Technician

    50+ Posts
    • May 2010
    • 67

    #1

    inquiry about riso rn 2030 ui

    good day to all!

    just bought, a risograph RN 2030 UI, just wanted to ask on how many legal cuts could make in one roll of master, and approximately how many reams can 1000 cc of ink?
    this is my first time to use a riso, reply are highly appreciated.

    thank you and more power!
  • bigste
    Technician

    50+ Posts
    • Dec 2009
    • 62

    #2
    I don't have your machine but my riso will do between 10 & 15k on one ink tube and 200 masters to the roll.

    Comment

    • joelsa12
      Trusted Tech

      250+ Posts
      • Nov 2008
      • 260

      #3
      masters are set at 200 per roll. the amount of ink that you get out of a tube of ink is based on run length. what actually uses a lot of ink is changing the master. when the old master comes off the drum it is soaked in ink. so if you are running say 100 copies per master the amount of copies you get out of a tube of ink would be a lot less than if you were running 1000 copies per master. according to a spread sheet put out by riso if your run length 500 copies with 6% coverage you will get around 30k per tube.

      Comment

      • downhiller67
        Technician

        50+ Posts
        • May 2010
        • 67

        #4
        thank you for the replies.

        Comment

        Working...