How to cancel print job directly on SC7700

[Greencorn]

Hi, i have a GR3770 connected to an SC7700 rip connected to an old mac with os 9.

I could not find the Riso Print Software to go with it so I only installed the print drivers and print from PDF's.

One thing I would like to know is if there is a way to cancel a print job directly on the rip.

Once the file is sent to print it opens a printer dialog box, but once it goes in the rip (aka the green light flashing) there is no way to cancel a print job from the computer.

Or maybe I just need the Riso Console software for mac...cant seem to find it.

Anybody can help me with this?

thanks a lot.

[Greencorn]

Re: How to cancel print job directly on SC7700

anyone?

[blagodaria]

Re: How to cancel print job directly on SC7700

Hello . I know this may not be the best place to post but i really need help connecting the Riso gr3770 37 pin to SC7700. So i dont have a cable and i wish to make one, the 36 pin plug that goes to the SC7700 is is easy to find and i will wire it directly to the 37 pins in the Riso but i need wiring diagram for those pins. If anybody has such a cable could you please test it and let me know how the pins in the cable are connected?. thank you so very much for any help

[Hwfa]

Re: How to cancel print job directly on SC7700

Once the file is sent to print it opens a printer dialog box, but once it goes in the rip (aka the green light flashing) there is no way to cancel a print job from the computer.



74-409