Part number for Riso Network Card compatible with RZ 310 UI

[Guest]

Hi,

I recently picked up a Riso RZ 310UI It's capable of housing a network card, but currently does not have one installed. I'd like to pick one up and install but am unsure of the part number for the particular card for this model.

I believe there is a card with just ethernet, and a card with ethernet and usb 2.0.

Does anybody happen to know of the part numbers for these?

Thank you.

[20gaugeO/U]

Re: Part number for Riso Network Card compatible with RZ 310 UI

S-4340 is the Print Control Board (serial printing) needed to mount the S-4092 is the Risorinc Network card (ethernet). USB is on the EZ line, I don't think it was ever available on the RZ.

[pj4nh]

Re: Part number for Riso Network Card compatible with RZ 310 UI

S-4340 is the Print Control Board (serial printing) needed to mount the S-4092 is the Risorinc Network card (ethernet). USB is on the EZ line, I don't think it was ever available on the RZ.

if the print board is installed on the rz 310 - where can the driver information be found for a mac computer? - or is it as simple as "plug and print"

[Iowatech]

Re: Part number for Riso Network Card compatible with RZ 310 UI

I don't think it is plug and print, but then again I haven't encountered a Riso connected to a Mac for years.
That being said, for print drivers you should probably go here:
RISO Global Network
and look for them. If the print drivers exist, they are there.

[pj4nh]

Re: Part number for Riso Network Card compatible with RZ 310 UI

I don't think it is plug and print, but then again I haven't encountered a Riso connected to a Mac for years.
That being said, for print drivers you should probably go here:
RISO Global Network
and look for them. If the print drivers exist, they are there.

any idea how to reconnect the riso with upgrade to snowleopard - apple talk is no longer available.

would someone at riso HQ be able to help with this issue?