Hello,
I recently purchased a RISO RP3700 for my print shop and have been leaning how to set it up and use it. I have now hit a snag, every master i make has two lines running through it which are passed on to the print.
I have looked inside the machine but there are multiple rollers which could be causing this and was hoping anyone could point me in the right direction on how to stop and solve this problem.
i have included an attachment of what is happening to the print, please view it.
Lovephoto (2).JPG
Dan
I recently purchased a RISO RP3700 for my print shop and have been leaning how to set it up and use it. I have now hit a snag, every master i make has two lines running through it which are passed on to the print.
I have looked inside the machine but there are multiple rollers which could be causing this and was hoping anyone could point me in the right direction on how to stop and solve this problem.
i have included an attachment of what is happening to the print, please view it.
Lovephoto (2).JPG
Dan
Comment