Wondering if there are any best practices to installing an options card on the PCB for the GR3750? I got one from another GR3750 and it looks like it just plugs in to the main PCB board and is secured on the frame by some screws. Is there a test mode or procedure I need to perform before plugging it in? I plan to use it for a SC3000 Computer Controller. Thanks!
-
-
Re: Installing Options Card on GR3750?
You need the interface board that plugs into the other board, as well as the interface cable with the female port that is installed in the middle
of the back of the machine (at the bottom), plus you need the cable that connects to the machine to the RIP SC3000.
Without ALL 3 components, you will not get it to work. We have what you need if you are missing a part. NO procedure or programming is necessary!
It's PLUG and PLAY!
We are the largest supplier of USED RISO drums (over 400 in stock) and spare PARTS (most models) in the U.S.
Let us know if we can help.
Lindsey Interdonati
President
Only Great Copiers
Wilmington, NC 28405
Comment