I wasn't sure where to post this so I'll start here. I'm a print shop owner in the US Virgin Islands. I have three KN Bizhub C6500's that I have serviced myself for several years. The machines have worked well but are getting on in years, as am I. I've got a few years left before I retire and close the shop. In the meantime, I need to keep these machines running. Lately, two of my C6500's have been giving me a persistent error code C-4520. I've researched this code here on copytechnet and have been able to get them going only to have the same code pop up again. I was thinking it might be beneficial to have a real technician who is experienced with these C6500's come to the shop and service/overhaul all three machines properly.
I've had independent technicians visit before to service my Mimaki large format printer and Polar paper cutter in the past. Typically, I pay for the airfare, provide ground transportation and provide accommodations in my comfortable AirBNB rental cottage in addition to the normal service fee. I would purchase whatever parts are suggested in advance of the visit during the pre-trip consultations.
Since I'm located in the US Virgin Islands, its easiest to fly here directly from Miami so a Miami based KN tech would have an easy trip.
Does this appeal to anyone?
I've had independent technicians visit before to service my Mimaki large format printer and Polar paper cutter in the past. Typically, I pay for the airfare, provide ground transportation and provide accommodations in my comfortable AirBNB rental cottage in addition to the normal service fee. I would purchase whatever parts are suggested in advance of the visit during the pre-trip consultations.
Since I'm located in the US Virgin Islands, its easiest to fly here directly from Miami so a Miami based KN tech would have an easy trip.
Does this appeal to anyone?