Brother MFC L8850 CDW upper fuser roller needed

[tonerjockey]

Hi Guys, any one know if there is a upper fuser roller that will work in this machine?? thank you, Jim

[aAandy]

Re: Brother MFC L8850 CDW upper fuser roller needed

no IF the fuser is jamming..ripped..grinding ..blurry print and you are a brother tech Service Update F1565 is a warranty replacement no charge to customer IF the machine has less than 100,000 pages on it. The customer can also call and they will walk the customer thru it over the phone. pretty simple.. a couple of door .. 4 screws ( if I remember right ) 3 wire harnesses ..then clear the codes.. print out Maint 77 report and fax back to Brother.

Brother doesn't spare fuser parts... replace whole unit.

any chance you can post this Service Update F1565?

thanks heaps

Andy

[Phil B.]

Re: Brother MFC L8850 CDW upper fuser roller needed

any chance you can post this Service Update F1565?

thanks heaps

Andy

if you aren't a ASC the update won't do you any good... if you are you can get it at

Object moved