Brother MFC-8870cdw error OE

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gideon
    Trusted Tech
    • Dec 2009
    • 275

    Brother MFC-8870cdw error OE

    I have the manual and check the control panel connection and cable and all connection on main PCB.

    The display of Brother comes on and the screen going blank and error OE comes on.
    No motor running etc.

    If you find a solution beside of replacing the main PCB please let me know.
  • Phil B.
    Field Supervisor
    10,000+ Posts
    • Jul 2016
    • 22810

    #2
    Re: Brother MFC-8870cdw error OE

    Originally posted by gideon
    I have the manual and check the control panel connection and cable and all connection on main PCB.

    The display of Brother comes on and the screen going blank and error OE comes on.
    No motor running etc.

    If you find a solution beside of replacing the main PCB please let me know.
    that's the only one that worked for me .. had to replace quite a few of them.

    Comment

    • allan
      RTFM!!
      5,000+ Posts
      • Apr 2010
      • 5402

      #3
      Re: Brother MFC-8870cdw error OE

      0E = program error.
      As per manual if firmware does not fix it replace main PCB.
      Whatever

      Comment

      • tsbservice
        Field tech
        Site Contributor
        5,000+ Posts
        • May 2007
        • 7387

        #4
        Re: Brother MFC-8870cdw error OE

        Are you sure about error code?

        Are you sure about model??
        Last edited by tsbservice; 09-01-2020, 07:47 PM. Reason: Add info
        A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
        Blessed are they who can laugh at themselves, for they shall never cease to be amused.

        Comment

        Working...