Brother MFC-9010 color registration is off

[gideon]

The colors registration is not in line with the black registration, the colors are above the black.
Different cartridges didn't help.
Calibration didn't help.
Transfer belt sensor was cleaned, didn't help.
Any idea how to fix it?

[tsbservice]

Re: Brother MFC-9010 color registration is off

Drums?

[Dickie]

Re: Brother MFC-9010 color registration is off

I'd be looking at the transfer belt and or the alignment sensor shutter although that normally throws an error so may be just some dirt on the sensor. Sensor is usually found on the board beneath the fuser

[Phil B.]

Re: Brother MFC-9010 color registration is off

I'd be looking at the transfer belt and or the alignment sensor shutter although that normally throws an error so may be just some dirt on the sensor. Sensor is usually found on the board beneath the fuser

+1 on the transfer belt