BRT DCP8060 "Replace PF1" Error Message

[olsong]

Replaced the PF1 paper feed roller kit and error message remains on display. Called Brother and they want me to send it to service center to have message removed. Does anyone know how to clear this message. The machine feeds paper just fine and has exceeded the 100000 copy limit. This error message is automatically generated when this machine exceeds 100000 prints whether it needs replacing or not.

Thanks for your help

[olsong]

Wow, finally found the instructions for removing the error messages that are displayed when a Brother DCP8060 goes beyond the 100000 print mark


1) Turn off printer
2) Press and hold menu button and turn on. Keep holding button until you see maintenance on display.
3) Press 88. This brings up parts replacement menu.
4) Press Up arrow until you see the part you replaced (laser, fuser, pf kit1, pf kit mp).
5) Press the OK button.
6) Power off and restart printer.

Hope this helps someone else.