[Error Code] Canon Imagepress C1 - Close the front cover of the finisher (E00713-000)

[Marcos]

Hello,

Since this morning our Imagepress C1 displays the warning: 'Close the front cover of the finisher'.
It comes with the error code: E00713-000

Is anyone familiar with this problem?

We believe that it has something to do with the sensors, we've tried everything, from closing the
door a thousand times to shutting the power off completely, but we can't seem to solve the problem.

Thanks in advance,

[SCREWTAPE]

E713 is a Finisher / Printer communication error
Maybe you have a blown fuse pcb or a bad finisher controller pcb.
Remove the finisher from the machine to verify that the machine is okay.
If so, then focus on the finisher.

[teckat]

Hello,

Since this morning our Imagepress C1 displays the warning: 'Close the front cover of the finisher'.
It comes with the error code: E00713-000

Is anyone familiar with this problem?





We believe that it has something to do with the sensors, we've tried everything, from closing the
door a thousand times to shutting the power off completely, but we can't seem to solve the problem.

Thanks in advance,

The Finisher, the Reader and the Pedestal / Cassette Feed Unit all communicate through the Cassette feeding Unit / Pedestal Controller to the print engine. If the print engine looses any communication to any of these accessories one or more error codes will occur intermittently.

Finisher Controller PCB / check & re-seat connectors on it

Re seating the connections on the De Curling Controller PCB
check the MOLEX connector on pedestal