[Misc] canon ir 6000 feeder

[Saji]

I got a problom with canon ir 6000, when i make copies from feeder, the copies are cut,i mean instead of A4 ,it makes A5, i changed the feeder tray with size adjusting VR, but problom still there, what could be the reason,plz help, thanks in advance.

[SCREWTAPE]

Try initializing the feeder.

[Saji]

Try initializing the feeder.

Thank you for the response,i already initialised the feeder, but the problom still persists.

[SCREWTAPE]

Did you do these adjustments.

Service Mode > FEEDER > FUNCTION > TRY-LTR, move the tray side guides to the LTR / 11x17 position and press [OK].
Press TRY-LTRR, move tray side guides to the STMT/LTRR/LGL position and press [OK].
Press Reset key twice to end Service Mode. Reboot machine.

[Saji]

Thankyou for your response, iwill check it and post the results soon.thanks again.

Did you do these adjustments.

Service Mode > FEEDER > FUNCTION > TRY-LTR, move the tray side guides to the LTR / 11x17 position and press [OK].
Press TRY-LTRR, move tray side guides to the STMT/LTRR/LGL position and press [OK].
Press Reset key twice to end Service Mode. Reboot machine.