Irc2880 copy counter ??

[maurimx]

Is there a way that I can see the color and black copy/print counter easier ??

I had a 3220 in which I had total color and total black/white on the counter..

Is there a way to enable this on the irc2880 ?

thanks for your help guys !

[teckat]

Is there a way that I can see the color and black copy/print counter easier ??

I had a 3220 in which I had total color and total black/white on the counter..

Is there a way to enable this on the irc2880 ?

thanks for your help guys !

u can also check in RUI Online ++++


- The 3-digit number in the counter column indicates the setting of the following service mode item: COPIER
>OPTION >USER > COUNTER1 to 6
- counters 2 through 6 may be changed using the following service mode item: COPIER>OPTION>USER.

There are a few hundred of software counters available but only 6 can be displayed in the Check Counter of the Color imageRUNNER. Below are the 6 most useful counters to display and monitor that actually will cover all counts and distinguish between black & white and color clicks.

101 = TOTAL 1
105 = TOTAL (full-color 1)
108 = TOTAL (black and white 1)
If you add TOTAL (full-color 1) and TOTAL (black and white 1), the total will be the same as TOTAL 1.
(105 + 108 = 101)

This is useful if you want to distinguish all full-color and black & white activity throughout the machine.

102 = TOTAL 2
106 = TOTAL (full-color 2)
109 = TOTAL (black and white 2)
If you add TOTAL (full-color 2) and TOTAL (black and white 2), the total will be the same as TOTAL 2.
(106 + 109 = 102)

NOTE: The software counters above show a number 1 and 2. These numbers are described below:

1 = single click count on any size paper
2 = double click count on paper sizes LTR(R), LEGAL, 11 X 17 and 12 X 18 only.

The number 1 is single click count for any paper size and the number 2 is for double click count on paper size
LTR(R), LEGAL, 11 X 17, 12 X 18 sizes



June 21, 2010 Product : All imageRUNNER Series, All imageRUNNER-iR Series, All imagePRESS Series, All Color Enabled imageRUNNER Series Title : Checking the Counter on the Copier Question :
How do you check the counter?

Answer :
You can check the machine's copy and print page totals on the display.

1) Press [Counter Check] on the control panel.





2) Press [Done].

Canon USA, Inc. Systems & Technical Support Division


You can disable the 101 Meter and enable the 102 Meter in imageRUNNER C2550 / C2880 / C3380 / C3480 / C2880i / C3380i / C3480i



Perform the following in Service Mode to set the counters. In service mode level 1 COPIER > OPTION > USER > CNT-SW set to 1.

Note:
System Software version 69.01 or higher must be loaded first before changing the setting.

[maurimx]

thanks for the help !

[SCREWTAPE]

When you go into
COPIER>OPTION >USER > COUNTER

101 can not be change.

102 can be set for b&w

The rest of the counters in COPIER>OPTION >USER > COUNTER can be set to 0.

This way you will only have the total and the black and white total.

Subtract the black and white from the total and that would leave you with the remaining clicks for color.

[teckat]

April 14, 2009
Product : imageRUNNER C2550 / C2880 / C3380 / C3480 / C2880i / C3380i / C3480i

Title :
Can I Disable the 101 Meter and Enable the 102 Meter?

Question :
Can I disable the 101 Meter and enable the 102 Meter?

Answer :
Yes.
Perform the following in Service Mode to set the counters. In service mode level 1 COPIER > OPTION > USER > CNT-SW set to 1.

Note:
System Software version 69.01 or higher must be loaded first before changing the setting. Canon USA, Inc. Systems & Technical Support Division