HPLJ 602DN misfeeding in tray 2 at times on 8 1/2 x14

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Djs72555
    Junior Member
    • Sep 2015
    • 2
    #1

    HPLJ 602DN misfeeding in tray 2 at times on 8 1/2 x14

    Have a refurb HPLJ602DN that feeds 8 1/2 ok but when feeding 8 1/2 x 14 it misfeeds at times. Paper is not catching on anything and will stop at various locations points from a non feed in tray to a misfeed over transfer area. Tray and tray size mechanism is functioning ok . Any suggestions would be greatly appreciated.
    Tags: None
    • Elmtech
      Trusted Tech

      100+ Posts
      • Nov 2013
      • 155
      #2
      Re: HPLJ 602DN misfeeding in tray 2 at times on 8 1/2 x14

      Is the firmware the latest?

        Comment

        • Djs72555
          Junior Member
          • Sep 2015
          • 2
          #3
          Re: HPLJ 602DN misfeeding in tray 2 at times on 8 1/2 x14

          Originally posted by Elmtech
          Is the firmware the latest?
          Just found out that tray 2 solenoid was missing the foam cushion and was causing the problem . Added a couple layers of Teflon tape to prevent residual magnetism. It is working find. Thanks for your input

            Comment

            Previous template Next
            Working...