4250 Jamming from tray 2

[theengel]

Re: 4250 Jamming from tray 2

You replaced the feed/sep rollers, but did you replace the PU rollers?

[TayTayTheTechnician]

Re: 4250 Jamming from tray 2

If you are able to print fine with the bypass (tray 1) try the black paper pick up arm. That part number is CR1 3352-000CN. I will also say that fuser for this model makes the machine act off sometimes in ways you wouldn't expect. If you have access to another 4250 in the office, I'd swap fusers and see what happens.

Good luck!

[Elmtech]

Re: 4250 Jamming from tray 2

Sounds like the solenoid.

[Buddy]

Hi Guys,
I have a 4250 that is intermittently jamming from tray 2. I have replaced the feed rollers, checked for anything blocking the paper path, and checked the feed solenoid for sticking. I did notice that the pick up roller assembly keeps cycling up and down - I didn't know if that's normal. I also noticed that when the printer goes to "clearing paper path," it will run several pages until it jams again. The code I'm getting is 13.01

Thanks in advance!