4250 Jamming from tray 2

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • theengel
    Service Manager

    1,000+ Posts
    • Nov 2011
    • 1784
    #16
    Re: 4250 Jamming from tray 2

    TO be fair, Elmtech was the first to point to that.

      Comment

      • Wild Bill
        Senior Tech

        500+ Posts
        • Jul 2005
        • 774
        #17
        Re: 4250 Jamming from tray 2

        This is so common I thought I would give some help. This video show how to determine if the solenoid is bad without taking covers off. This test can be used on many other Laserjet printers.
        Izzy

          Comment

          • j2shortt
            Learning to speak PCL...

            50+ Posts
            • Feb 2019
            • 54
            #18
            Re: 4250 Jamming from tray 2

            Originally posted by theengel
            If you just remove the sticky pad, you end up with the same problem because the metal plate on the solenoid gets magnetized and still sticks.
            Well, I'll be God damned! I was puzzled why the solenoid kept sticking after I removed the pad! Thanks for the Info!

              Comment

              • theengel
                Service Manager

                1,000+ Posts
                • Nov 2011
                • 1784
                #19
                Re: 4250 Jamming from tray 2

                Try doing it this way:

                Sticky Solenoids

                  Comment

                  Previous 1 2 template Next
                  Working...