please i need help.i have been working on hp3050 for two weeks now.it goes on and off repeatedly.the scanner vibrates but nothing stuck like a paper.the carriage moves freely.what could be the solution?thanks in advance.
-
-
Re: hp 3050 powers on and off repeatedly
I would try a formatter first.
I had one of these hit by a storm and not power back on. I replaced every single board in it, and still nothing. I believe one board was knocking out another board, and the only way to fix it was to replace all of them at once, instead of one at a time. I gave up, and told the cust it wasn't worth the effort. I lost money on that one. -
Re: hp 3050 powers on and off repeatedly
sorry for that.aside changing all the boards,what else can be done?Comment
-
Re: hp 3050 powers on and off repeatedly
Dumpster time!IzzyComment
-
Re: hp 3050 powers on and off repeatedly
it's the logics of the printer.. converts data into print .. the DCC is what take the DC power and sends it to motors / switches / sensors .. LVPS converts AC ---> DC power... HVPS takes the DC and shunts it to the contacts for toner/drum/transfer rollersComment
-
Re: hp 3050 powers on and off repeatedly
can you print the config page? does it give any errors? if so what?
do they have it plugged straight to the wall? DO NOT plug a laser printer into a battery backup.. it can kill the battery and CAN cause problems like you are seeing.Comment
-
Re: hp 3050 powers on and off repeatedly
the customer travelled and he is to return back april.will keep you updated.thanks for the replyComment
Comment