HP laserjet 9000 MFP light copies

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • J_Lee
    Trusted Tech

    100+ Posts
    • Oct 2008
    • 111
    #1

    HP laserjet 9000 MFP light copies

    If you print internally from the machine the document looks great. When you make a copy and it comes out really light. Firmware is up to date, I took out all optical mirrors and cleaned them they were filthy and had film all over them but not much improvement. Any suggestions thanks.

    J
    Tags: 9000, copies, darker, laserjet, light, mfp
    • J_Lee
      Trusted Tech

      100+ Posts
      • Oct 2008
      • 111
      #2
      Cancel... Customer somehow changed the toner density setting and I had adjusted it but did not realize that you go down in number to go darker. I assumed you went up to darken.

        Comment

        • prntrfxr
          Service Manager

          1,000+ Posts
          • Apr 2008
          • 1627
          #3
          HP laserjet 9000 MFP light

          Lol, no sweat...happens to the best of us. At least you didnt take the machine half apart for nothing.
          Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

            Comment

            Previous template Next
            Working...