Went to my first 501 yesterday. This was my first hands on with this model.
Hoping for some input since I don't have a manual yet.
With plenty of paper in tray, it will print 1 or 2 pages, then says LOAD PAPER.
Pushing the tray in slightly, I could hear tray lifting a little again and printer comes to ready.
My question is, I guess, what's the most common thing with this.
Is it usually the cassette itself or something with the lift ?
Paper sensor is ok since it does know if paper is there.
Seeems like LIFT.
(Not a rookie. 30 years Toshiba/Kyocera. Inheritided these HP's )
Hoping for some input since I don't have a manual yet.
With plenty of paper in tray, it will print 1 or 2 pages, then says LOAD PAPER.
Pushing the tray in slightly, I could hear tray lifting a little again and printer comes to ready.
My question is, I guess, what's the most common thing with this.
Is it usually the cassette itself or something with the lift ?
Paper sensor is ok since it does know if paper is there.
Seeems like LIFT.
(Not a rookie. 30 years Toshiba/Kyocera. Inheritided these HP's )