hp 2600n

[blsquires]

i am having a problem getting the colour alignment right .
i have been on the customers server which has the hp tools on it .i printed out the test page and following hps advice i replaced yellow, magenta and black units .lo and behold no change .all i need to do is adjust the alignment .is there a way.

thanks in advance brian

[prntrfxr]

hp 2600n

what are you refering to exactly?

colors not matching whats on the pc, blurred image, distortions dropouts, etc...?

More specifics needed for more detailed solutions. Make sure same problem is occuring from contol panel as from PC. If its only from PC its very likely a software/communication problem and not the printer. Also, does the same problem occur when the configuration page is printed. What about if engine page is printed?

You could try the following:

1) Select color match in the color tab on the printer driver
2) Change paper to different type, try OEM paper
3) Avoid extremely light or dark colors that would be rendered white or black.
4) Run multiple (at least 3) calibrations
5) Try new transfer belt


Hope this helps you.

[nhanph]

just go to "system" on the control panel and choose cablibrate now. hope this will help