If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
HP downgrade firmware to get rid of dynamic security
Re: HP downgrade firmware to get rid of dynamic security
i have these.
PW377dw_PW477dw_001.1908C.ful2
PW377dw_PW477dw_001.1921E.ful2
PW477dn_001.1829A.ful2
PW477dn_001.1839A.ful2
PW477dn_001.1850B.ful2
PW477dn_001.1908C.ful2
PW477dn_001.1921E.ful2
PW477dw_001.1829A.ful2
PW477dw_001.1839A.ful2
PW477dw_001.1850B.ful2
Could you please share these firmware versions with me? My HP PageWide Pro 477DW printer is not printing after the update. I was able to downgrade to version 1908, but I need an even earlier version. Thank you in advance, Igor.
Does someone now the error with "supply system" on pagewide477pro with third party cartdiges?
When i test a original 971x and glue an self reset chip on this cartridge i get this fault too after several print jobs. When i remove this chip, and the original chip has contact to the printer it works pretty well.
I want to test different firmwares. I tried the 1908C, but they did not work.
Comment