HP 4000/QUALITY

[cucuklotz]

HI,
Are there any adjustments I can make for increased density?The bold print is OK,but the finer lines tend to fade.The tranfer roller is relatively new and cartridge really didnt help.
Thankds, Andy

[fixthecopier]

I would bet money that you have dust on the laser lens. Take the top off and clean the laser mirrors and lens.

[cucuklotz]

hp 4000/Quality

HI,
I try to cleanning laser today.
THANKS FOR suggestion,Ill let you know if it works,
ANDY

[LaserSharp]

Good call on the laser optics, I've seen more than a few 4000's with this issue. And almost always if you glance around you will spot a can on "dust off" or similar, Of course no customer will admit to using it in the printer but ya I'm sure they use it for the stapler.

[cucuklotz]

HP 4000/QUALITY

HI,
Thanks for responding to my post.The customer was closed today,so Ill clean out on Mon. or Tues(they said no rush,you know that means "we dont want to spend a lot").Ill let you know how it turns out.
Thanks, Andy