LJ2200 Trailinglast inch fades out or doesn't pring

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • axyun
    Service Manager

    Site Contributor
    1,000+ Posts
    • Aug 2007
    • 1323

    #1

    LJ2200 Trailinglast inch fades out or doesn't pring

    Last inch on trailing edge doesn't print or fades out. Also fades a little on far right side. New OEM cartridge. When print out test page the line at bottom doesn't print which is the bottom part of the box for test page. Frank
  • prntrfxr
    Service Manager

    1,000+ Posts
    • Apr 2008
    • 1622

    #2
    LJ2200 Trailinglast inch fades out or doesn't pring

    did you check paper size guides in the tray?
    Did you print a config. page and see what the size the printer thinks it is?
    Make sure preferences in the driver are set to the right tray.

    If all those things are good you may have a bad laser scanner, as that is a weakness with that particular machine.
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

    Comment

    • axyun
      Service Manager

      Site Contributor
      1,000+ Posts
      • Aug 2007
      • 1323

      #3
      Cofiguration said letter size and guides appeared to be set okay. I will double checkand they have an optional 3rd tray so I will see if it prints same way from each. Thanks. Frank

      Comment

      Working...