HP Laserjet 2200 cartridge disassembly

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    HP Laserjet 2200 cartridge disassembly

    Hello there, guys and gals!

    I've got at home an oldie but goodie Laserjet 2200DN with a recycled imaging unit. The prints are coming out all dirty, and I'm thinking that a simple cleaning on the drum blade should solve the problem.

    Are there any instructions on how to disassemble the thing?

    Cheers!
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: 2200, cartridge, dirty, disassemble, disassembly, fusing unit, issu, laserjet
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Do yourself a favor, don't disassemble! By the way, did you check the fusing unit? Could also be the cause.
      Last edited by Eric1968; 06-29-2009, 04:12 PM.

        Comment

        • northerntech
          Technician

          50+ Posts
          • Jun 2008
          • 69
          #3
          what is the # on the cart?

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              Originally posted by Eric1968
              Do yourself a favor, don't disassemble! By the way, did you check the fusing unit? Could also be the cause.
              Originally posted by Norhterntech
              what is the # on the cart?
              Have no idea, I'm not at home. But when I'll get there, I'll post it here.
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                • northerntech
                  Technician

                  50+ Posts
                  • Jun 2008
                  • 69
                  #5
                  i you have a measurement of the distance of the mark i have a chart tell you what part is thats causing the issue

                    Comment

                    Previous template Next
                    Working...