HP 4700 Trans Belt reset

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CDVMike
    Technician
    • Jul 2008
    • 33
    #1

    HP 4700 Trans Belt reset

    With these belts on national Backorder I would like to know if there is a manual reset for the counter.
    Tags: 4700, belt, hp 4700, page count, reset, wrong
    • fixthecopier
      ALIEN OVERLORD

      2,500+ Posts
      • Apr 2008
      • 4714
      #2
      Lets see, the 4600 has it in the menu under configure, then resets. I can't find it in the 4700 manual. If you must, and can not find it, try resetting the color page count and power off and back on.
      The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

        Comment

        • prntrfxr
          Service Manager

          1,000+ Posts
          • Apr 2008
          • 1627
          #3
          HP 4700 Trans Belt reset

          this is just off the top of my head so I could be wrong, but the 4700 fusers automatically reset and there is no manual way to set it. More than likely there is no manual reset for the belt either.
          Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

            Comment

            Previous template Next
            Working...