hp cm1312 mfp

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Realtech
    Trusted Tech
    100+ Posts
    • Oct 2009
    • 103

    #1

    hp cm1312 mfp

    I have a hp cm1312 mfp the problem is the colors misplace out of aligment I try to calibrate 4 time ; firmware has been update; all four toner cartridges has been replace same problem. Hp told me to replace the formater board and dc controller after these parts has been replace the problem has not been fix. This printer still under warranty .Any suggest?
  • prntrfxr
    Service Manager

    1,000+ Posts
    • Apr 2008
    • 1627

    #2
    hp cm1312 mfp

    i'm not familiar with this unit, but most color registration problems result from toner being in a place it is not supposed to be.

    Start by removing all cartridges and ITB. Clean the entire cavity and all cartridges. Clean the color registration detector (usually located at above the ITB). Clean all scanner lenses. Try replacing the offending color cartridge to see if the problem goes away. Hope this helps you. Please post resolution to assist others.
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

    Comment

    • Rob Sandberg
      Trusted Tech

      250+ Posts
      • Jul 2008
      • 275

      #3
      Do you have a company near you that does HP warranty repair?
      If so take it to them. That way hp has to pay for the repair and not your customer.

      If not see the above post.

      Rob S

      Comment

      • Realtech
        Trusted Tech
        100+ Posts
        • Oct 2009
        • 103

        #4
        Many thanks, but I am a HP technicien locate in the Caribbean.

        Comment

        Working...