Good day all,
I have an issue with a HP3600n color laser printer, this printer had an error 10.92.02 this I was able to fix, then after that another error 59.C0 this was also fixed, the only issue now is when I print internally or externally I have missing colors, Black is present, and a 1" Band of Magenta.
I have replaced High voltage board and dc controller but problem persist, the only thing I can really think about are the laser shutters probably not opening.
And also the machine keep calibrating everytime it is unplugged and goes on for about 10 mins or so.
Any suggestion I would greatly appreciate.
Linuxxpwin
I have an issue with a HP3600n color laser printer, this printer had an error 10.92.02 this I was able to fix, then after that another error 59.C0 this was also fixed, the only issue now is when I print internally or externally I have missing colors, Black is present, and a 1" Band of Magenta.
I have replaced High voltage board and dc controller but problem persist, the only thing I can really think about are the laser shutters probably not opening.
And also the machine keep calibrating everytime it is unplugged and goes on for about 10 mins or so.
Any suggestion I would greatly appreciate.
Linuxxpwin
Comment