cm6040 mfp blooming logo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ucinn
    Trusted Tech

    250+ Posts
    • Jun 2009
    • 383
    #1

    cm6040 mfp blooming logo

    We have two of these peices of crap. oth stop at 6/6 with B lit, won't go to C. ordered 2 new formatters and they both get to that point and come up with a 49.4c02 error. Can't do firmware updates because they never get to the ready state. Tried disconnecting accesories, hard drives, Nic board, always does the same..anyone seen this.
    Tags: accesories, error, firmware, format, formatters, log, logo, mfp, nec, nic, stop, updates
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


      Paul@justmanuals.com

        Comment

        • prntrfxr
          Service Manager

          1,000+ Posts
          • Apr 2008
          • 1627
          #3
          IT Resource Center forums - hp cm6040f mfp 49.c02 error
          Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

            Comment

            • ucinn
              Trusted Tech

              250+ Posts
              • Jun 2009
              • 383
              #4
              Originally posted by prntrfxr
              IT Resource Center forums - hp cm6040f mfp 49.c02 error
              It's not doing this when scanning, it does it when booting up. I have another formatter on order, we'll see what that does. I can't flash the firmware since it never makes it to the ready state.

                Comment

                • ucinn
                  Trusted Tech

                  250+ Posts
                  • Jun 2009
                  • 383
                  #5
                  Originally posted by ucinn
                  It's not doing this when scanning, it does it when booting up. I have another formatter on order, we'll see what that does. I can't flash the firmware since it never makes it to the ready state.
                  Got the new formatter in and that took care of it. They sent me a bad formatter the first time, so they are getting 2 back under warranty. After working on these hps, it seems like the machine isn't bad, but their circuit boards and fusers are horrible.

                    Comment

                    • prntrfxr
                      Service Manager

                      1,000+ Posts
                      • Apr 2008
                      • 1627
                      #6
                      It does seem to be the problem with the new model machines. The formatters are weak, even the new OEM's.
                      Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

                        Comment

                        Previous template Next
                        Working...