Have a DJ 500, turn on unit, carrier moves to the left, then to extreme right. Goes onto service station, back to the left, just off the service station and comes up with a 21:10 error. Looking closely, after the carrier moves to the left, the cleaning wipers move forward then back to home, the carrier then moves to the service station. Replaced the carrier belt about 6 months ago, been working until 2 days ago. Any thoughts? Thanks..... Jeff M.
DesignJet 500 21:10 error
Collapse
X
-
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest collection of manuals | Instant Downloads - Just Manuals | The Internet's largest collection of manuals | Instant Downloads
Paul@justmanuals.com -
Jeff, alot of times you can clean the service stations out and they will work perfectly fine again. I save all my old ones and clean and test them and they go back on the shelf as used units, but perfectly good for a quick field replacement.Comment
-
It's a good idea to keep the older cleaning stations and clean them like Ducttape said being that they are getting a little harder to acquire. From what I understand, HP is phasing these parts out.CompTia A+ Certified
CompTia Net+ Certified
CompTia Server+ Certified
CompTia Project+ Certified
OP Scanshare CertifiedComment
Comment