i have hp 800ps displayed
erreur 05:10
help me plez
erreur 05:10
help me plez
-
-
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads
Paul@justmanuals.com -
help me plezComment
-
05:10 Error
Formatter failure or HP-GL/2 Accessory Card failure.
Once I had this error had to replace HP-GL/2
Good luckComment
-
5:10 You have an error on your HP DesignJet 800PS plotter, here may be the solutionfor you.
The image of the hard drive on USB. This image must be copied to the hard drive HPDesignJet 800PS plotter, all before it is preferably to change the hard drive of the HP-GL / 2.
I remain at your disposal for more information.Comment
-
230 USDComment
-
help me plzComment
-
Hello,
I had the same problem on my HP800PS (SE 5:10), I offer my solution worked well for me.
5:10 You Have an error on your HP DesignJet 800PS plotter, here May Be the solutionfor you.
The image of the hard drive is USB. Must Be This image copied to the hard drive HPDesignJet 800PS plotter, all preferably Before It Is to change the hard drive of the HP-GL / 2.
The price of this service is 230USD.
I Remain at your Disposal for more information.Comment
-
Hello,
I had the same problem on my HP800PS (SE 5:10), I offer my solution worked well for me.
5:10 You Have an error on your HP DesignJet 800PS plotter, here May Be the solutionfor you.
The image of the hard drive is USB. Must Be This image copied to the hard drive HPDesignJet 800PS plotter, all preferably Before It Is to change the hard drive of the HP-GL / 2.
The price of this service is 230USD.
I Remain at your Disposal for more information.Comment
-
replacement of the HP-GL / 2 is too expensive, then you have to start from the formatter already. It is impossible to change the formater if you're not the contents of the hard drive. So I advise already removed the hard drive of the HP-GL / 2 and then connect to a computer to see if we can access it, if it is not the case and the hard drive makes noise Upon restart, the solution for you is to buy a hard drive over 15GB + content of the hard drive that allows restarting the HP800PS. The contents of the hard drive I sell it to a USB 230USD more than 13Go because the size of the content is around 13Go.
I Remain at your Disposal for more information.Comment
-
Hello,
I had the same problem on my HP800PS (SE 5:10), I offer my solution worked well for me.
5:10 You Have an error on your HP DesignJet 800PS plotter, here May Be the solutionfor you.
The image of the hard drive is USB. Must Be This image copied to the hard drive HPDesignJet 800PS plotter, all preferably Before It Is to change the hard drive of the HP-GL / 2.
The price of this service is 230USD.
I Remain at your Disposal for more information.Comment
-
replacement of the HP-GL / 2 is too expensive, then you have to start from the formatter already. It is impossible to change the formater if you're not the contents of the hard drive. So I advise already removed the hard drive of the HP-GL / 2 and then connect to a computer to see if we can access it, if it is not the case and the hard drive makes noise Upon restart, the solution for you is to buy a hard drive over 15GB + content of the hard drive that allows restarting the HP800PS. The contents of the hard drive I sell it to a USB 230USD more than 13Go because the size of the content is around 13Go.
I Remain at your Disposal for more information.Comment
-
Hello,
I had the same problem on my HP800PS (SE 5:10), I offer my solution worked well for me.
5:10 You Have an error on your HP DesignJet 800PS plotter, here May Be the solutionfor you.
The image of the hard drive is USB. Must Be This image copied to the hard drive HPDesignJet 800PS plotter, all preferably Before It Is to change the hard drive of the HP-GL / 2.
The price of this service is 230USD.
I Remain at your Disposal for more information.Comment
Comment