Hp laserjet p4014n not turning on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gitana1983
    Trusted Tech

    100+ Posts
    • Mar 2009
    • 141

    #1

    Hp laserjet p4014n not turning on

    Hello Everyone,

    I have an HP Laserjet P4014N that when I turn it on it makes the noise like it's warming up but then it stays dead. We replaced the power supply board but still we are having the same issue. Any ideas on what else to try?
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Hp laserjet p4014n not turning on

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

    Comment

    • Brett207
      Technician
      • May 2011
      • 35

      #3
      Re: Hp laserjet p4014n not turning on

      Have you tried an Engine test?

      With the device powered up, locate the Engine test button, and press it. If the printer engine is functioning, you will get a print out with some thin lines across it. This is a basic test.

      The Engine test button is on the right hand side, bottom of the slotted air vents, you will see a small slot. you will need a small screwdriver to press it.

      If the engine test works, you probably have a dead Formatter board.

      A dead Formatter will result in no control panel display.

      Good luck

      Comment

      Working...