[Error Code] HP LJ-Pro 100 M175NW Says Overheating cooling

[Wild Bill]

Says Overheating cooling; She said it happened while doing even small jobs 10 and less. I ran 25 and it didnt do it.
Is there a Min/Max amount before splitting jobs or is there something im not aware of? I realize this is a low volume machine but 10 seems kinda crazy small amount to get this message. The manual just says to check air circulation and i cant find the exhaust or intake fan anywhere. Nothing leaning or against machine and is in a room with ac so... also says to split up big jobs. Any info is appreciated...

[JustManuals]

Re: HP LJ-Pro 100 M175NW Says Overheating cooling

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Wild Bill]

Re: HP LJ-Pro 100 M175NW Says Overheating cooling

Heres is the information I found from HP.

Cool-down mode The product is too hot to continue printing at normal speed. The product will pause longer between printed pages until it cools down.
Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs...bt