I have a cp3525 that nakes a rubbing or groanong noise that comes and goes. It seems more prevalent when the machine is calibrating. I have replaced the transfer belt assy and gutted the machine to check all the mechanical drive parts with no success. Any help or ideas apperciated.
-
-
Re: Groaning or rubbing noise froma cp3525 transfer belt
probably bushing out of positionLife should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!". -
Re: Groaning or rubbing noise froma cp3525 transfer belt
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Comment
-
Re: Groaning or rubbing noise froma cp3525 transfer belt
Did you remove toner cartridges 1 at a time? Thats what I would start with and rule out first.
DISABLE CARTRIDGE CHECK This item allows you to remove a print cartridge to help determine which
cartridge is the source of a problem.IzzyComment
-
Re: Groaning or rubbing noise froma cp3525 transfer belt
Did you ever isolate your problem? I have one doing the same, and a squeak. Swapped trans-belt. Cartridges are not in contact and squeak continues.
Comment
-
Re: Groaning or rubbing noise froma cp3525 transfer belt
I would remove the main motor and turn each unit gear by hand till I heard the noise.Why do they call it common sense?
If it were common, wouldn't everyone have it?Comment
Comment