HP LJ 1320 unkown part

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kikinkuntry
    Certifiable technician
    • Mar 2013
    • 27

    #1

    [Misc] HP LJ 1320 unkown part

    So I got this little lj 1320 for free because it was "Broken". I generally work on copiers and stay away from these little gear grinders, but free is the best price. I Found a piece of tape in the registration assembly covering a sensor flag which was probably causing my phantom jam. I have a New problem though, I broke it down pretty far and upon reassembly I have one little stupid plastic arm that I cannot find in the manual, or remember its place of origin!

    Any help would be greatly appreciated!
    Attached Files
    Last edited by kikinkuntry; 05-26-2013, 08:22 PM.
    I'd be happy to come out and wipe off your dirty glass. One question however, do you also pay someone to come out and wipe your dirty ...
  • Iowatech
    Not a service manager

    2,500+ Posts
    • Dec 2009
    • 3930

    #2
    Re: HP LJ 1320 unkown part

    I think that is part of the linkage that disengages drum or fuser drive when the front door is open. If you can share a picture of the right hand side of the machine where the main drive is, that could be helpful.

    Comment

    • MR Bill
      Senior Tech

      500+ Posts
      • Jan 2010
      • 532

      #3
      Re: HP LJ 1320 unkown part

      Is that part of the front door interlock linkage? Does it go on the left side of the machine. The picture is at the right area of machine? What problems are you having anyway. A lot of times you don't even need all those extra parts. LOL.

      Comment

      Working...