HP DesignJet T610 Printhead Issues

[Tim C]

I have a HP DesignJet T610, came in to the shop with a Bad Drive Belt. After a few hours to replace that belt, Powered it up and it showed one of the print heads were bad..(cyan/magenta) ok.... figured might as well replace them all. All OEM Brand New. Now it comes up with a message
" Printhead replacement not complete...press ok to start printhead replacement" No matter what I do it still produces this error...even tried putting in the old heads. PLEASE HELP..Thank You

[JustManuals]

Re: HP DesignJet T610 Printhead Issues

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Tim C]

Re: HP DesignJet T610 Printhead Issues

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

I do have the Manual, tried everything I could find...

[Tim C]

Re: HP DesignJet T610 Printhead Issues

I do have the Manual, tried everything I could find...

Found the Problem to be Ink low...even though they felt and registered somewhat full

[Polo-022]

Re: HP DesignJet T610 Printhead Issues

This is it! Ink cartridge low...
I have had the same phenomenon a month ago...
i spent my life disassembling again and again the printer to find what was wrong..

[kamoro]

Re: HP DesignJet T610 Printhead Issues

Found the Problem to be Ink low...even though they felt and registered somewhat full

Hi,
I have exactly the same problem, so you have replaced all the low ink cartridge?
That is all?

Many thanks in advance,
Fabrizio

[Tim C]

[kamoro]

Re: HP DesignJet T610 Printhead Issues

That's ok, I will try and hope is going to work again...
Many thanks again