Replace faulty print head in hp designjet t610

[archybos]

I have hp designjet t610,I have replace the NEW MK-Y printhead and it showing me REPLACE FAULTY PRINTHEAD WHAT IS THE POSSIBLE PROBLEM AND IS NEW A PRINTHEAD,is there any way i can bye pass it without show this massage again

[Iowatech]

Re: Replace faulty print head in hp designjet t610

I have hp designjet t610,I have replace the NEW MK-Y printhead and it showing me REPLACE FAULTY PRINTHEAD WHAT IS THE POSSIBLE PROBLEM AND IS NEW A PRINTHEAD,is there any way i can bye pass it without show this massage again

The problem is that enough of the ink nozzles on the the print head have worn out and the machine can no longer compensate for that.
You might try turning the machine off and unplugging it, there's a tiny chance that might help, but other than that there's no way to get around it, the print head needs to be replaced. It is pretty easy to do, too.

[JustManuals]

Re: Replace faulty print head in hp designjet t610

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com