P4515n, error code 10.94

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rdyjnkns
    Trusted Tech

    100+ Posts
    • Nov 2010
    • 135

    #1

    [Error Code] P4515n, error code 10.94

    The following message appears "10.94.00 REMOVE SHIPPING LOCKS FROM CARTRIDGE.", even after I reboot the printer. This is a new toner cartridge that I used in another P4515n and it worked fine. It must be a faulty sensor. Any assistance would be deeply appreciated.

    Thank you.

    V/R

    Rudy
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: P4515n, error code 10.94

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • Blizzoo
      Senior Tech

      Site Contributor
      500+ Posts
      • Aug 2013
      • 605

      #3
      Re: P4515n, error code 10.94

      The printer culdn't read the chip,sommething is stuck/broken between chip cartridge and chip reader.
      Defects are simple, our mind is complicated

      Comment

      • HP:guy
        Trusted Tech

        250+ Posts
        • Feb 2013
        • 279

        #4
        Re: P4515n, error code 10.94

        Try re-positioning the chip on the cartridge to see if it makes better contact and check the contacts where the chip touches.

        Comment

        • rdyjnkns
          Trusted Tech

          100+ Posts
          • Nov 2010
          • 135

          #5
          Re: P4515n, error code 10.94

          I found the problem, thanks to another forum (P4014n 10.94.00 error). One of the two pins that connect to the left was bent and not making contact with the metal plate on the drum. Just had to corrected it, and the printer is working fine.

          DSC01615.jpg

          Life is good. Thanks to all.

          Comment

          Working...