CM6040MFP

[ucinn]

I have one that brings the bootup screen then freezes on 5/6 A every time...the blooming logo stops blooming and the three lights stop. Any ideas? Also, is there a list out there of what these letters and numbers correspond to during the boot up process? That would be a great troubleshooting tool.

[micko_gm]

Re: CM6040MFP

https://www.mediafire.com/?rz4e8ytg277qqna

[ucinn]

Re: CM6040MFP

https://www.mediafire.com/?rz4e8ytg277qqna

Thanks, I already have the manual for this machine. I'm looking for a chart on what the machine is going at 4/6 A then 4/6 B..and so on. Don't know if it exists, but it would be nice if it did.

Anyway, did an engine test on it, it warmed up, printed the test sheet out. turned it back off then back on and now it works. Must have been a logic lock somewhere which the engine test freed up. These things really suck..lol

[HP:guy]

Re: CM6040MFP

You need to reload firmware.

http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?sp4ts.oid=3644752&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswEnvOID%3D54%7Caction%3DlistDriver&ac.admitted=1386717734659.876444892.492883150