HP 4200dtn

[KHAN]

AMIGOS; I HAVE HP 4200dtn . HOW CAN I CLEAR THE MANTAINCE CALL , OR PERFORM MANTAINCE WITH OUT CHANGING THE MANTAINCE KIT ?

[brotherman27]

go under the service menu, type in pin # 11420002, go to maint. count, and set to 0...

[Lance]

AMIGOS; I HAVE HP 4200dtn . HOW CAN I CLEAR THE MANTAINCE CALL , OR PERFORM MANTAINCE WITH OUT CHANGING THE MANTAINCE KIT ?

Resetting the maintenance-kit counter (LJ 4200/4300)
After a maintenance kit is installed, the maintenance-kit counter must be reset by using the following
procedure.
1 Turn the printer power off.
2 Hold down the check mark(SELECT button), and then turn on the printer power. Continue holding down the check mark button until
all three printer control-panel lights flash once and then remain on. This might take up to 10
seconds.
3 Press (UP ARROW button) to scroll to NEW MAINTENANCE KIT.
4 Press to reset the maintenance-kit counter.
NOTE Perform this procedure only after a maintenance kit has been installed. Do not use
this procedure to clear the PERFORM PRINTER MAINTENANCE message temporarily.

[KHAN]

HP 4200dtn

thanks Dear Friends I Slove The Prob, Thanks For Your Help'

[KHAN]

thanks I Do The Same