[Jamming] laserjet 1320

[akstudie]

When using the manual tray#1 to feed envelopes or a sheet of paper it will pull the media in a little way in and stop. With the green led is on then when you want to print it will go to the error with the flashing yellow. when you press go the it feeds the paper. I exchanged out the registration roller assembly and aired out the sensors and still had the problem. Not sure how this feature works since its not like the other HP manual tray setup. I tried to print a demo from printer and a doc from my laptop and same problem. I don't know if its a board, firmware or other parts or the operation not performed correctly. Any help deeply appreciated.Thanks

[faxman28]

Re: laserjet 1320

When using the manual tray#1 to feed envelopes or a sheet of paper it will pull the media in a little way in and stop. With the green led is on then when you want to print it will go to the error with the flashing yellow. when you press go the it feeds the paper. I exchanged out the registration roller assembly and aired out the sensors and still had the problem. Not sure how this feature works since its not like the other HP manual tray setup. I tried to print a demo from printer and a doc from my laptop and same problem. I don't know if its a board, firmware or other parts or the operation not performed correctly. Any help deeply appreciated.Thanks

looks like it might be normal operation, This is from hp :



When feeding media into the single-sheet priority input slot, the printer pulls the media partially into the engine and waits for you to press the Go button (blinking light). You must wait for the printer to stop before feeding another sheet of media. You can only feed one sheet of media at a time.