lexmark C925 waste container

[1stcavvet]

customer tried to replace waste container machine says (near life end), install new one and machine still says same message. there's no reset in the config menu for waste container, and I don't see how it realizes a new container, it doesn't plug in anywhere I only see the auger shaft out the back. WHAT AM I MISSING THANKS

[subaro]

Re: lexmark C925 waste container

82.xx Waste toner bottle nearly fullOrder a replacement waste toner bottle immediately.1 Replace the waste toner bottle.For instructions on installing the waste toner bottle, from the printer control panel touch More Information.2 Touch Continue to clear the message and continue printing


The above is in the users guide troubleshooting section.

[1stcavvet]

Re: lexmark C925 waste container

Thank you, I think the message to replace has to be on the screen before it will reset. Near life end means order but don't put it in till is says replace

[subaro]

Re: lexmark C925 waste container

Thank you, I think the message to replace has to be on the screen before it will reset. Near life end means order but don't put it in till is says replace

EXACTLY. lexmark does things differently and in an unorthodox manner. their message are strange at time and you have to look all over the place to find information. A newbee working on these will have some head scratchers for a while. I think they kind of forces you to navigate the manual, in the way the teardown are described.